You get an airflow-friendly mesh front panel with enough space for two 140 mm or three 120 mm intakes. It might be cheap (by case standards), but the Versa H18 isn’t all that compromised. It’s one of the cheapest mATX cases you can get without resorting to some no-name Aliexpress special, making it our pick for the best budget Micro-ATX case. On a tight budget and don’t want to stretch to afford the Cooler Master NR400? You might want to check out the Thermaltake Versa H18, then. But nothing’s stopping you from loading the top panel up with four 120 mm fans or two radiators simultaneously (for example). It comes with a 200 mm intake fan by default, which by itself is a bit limited. The front I/O can also be unscrewed and moved to either the case’s top, left, or right side.īeyond the clever modular panels, the Level 20 VT’s big party trick is the amount of room it has for fans or radiators. Interestingly, these panels can be swapped around, meaning that you can conceivably place the Level 20 VT on any of its sides. The Level 20 VT is a premium case with tempered glass all around, perfect for showcasing your build in all its color-coded RGB glory. Thermaltake has a ton of cube cases in its repertoire, so it’s no surprise that they have one of the best Micro-ATX cube cases in the form of the Level 20 VT. It works, too, with the S400 measuring a whisper-quiet 30.1 dBA under load in Tom’s Hardware’s testing. You get the standard noise insulation and padding alongside a couple of Silencio FP120 PWM fans to further reduce noise in general. The S400 ticks all the boxes for a silence-focused case. That’s not a bad thing at all, as the Define cases are some of the best silent PC cases you can buy today. It should be enough for most mATX rigs, but it definitely pales compared to the two Cooler Master offerings on this list.Ĭooler Master’s Silencio S400 wears its influences on its sleeve: the sound-insulated panels, hinged front door, and minimal lines are clearly inspired by Fractal Design’s Define cases. It’s not too shabby with drives either, with three dedicated 2.5” mounts behind the motherboard tray and space for two 2.5 or 3.5-inch drives in the drive cage. If you want to run a custom water-cooling loop in a Micro-ATX case, this is one of your best choices. Not only does it support seven 120 mm fans, but it also sports room for two 240 mm radiators in the front and top of the case. The Meshify C Mini’s main strength is its support for a wide range of cooling setups. It’s an older case, but it’s still a solid product worth considering for its above-average cooling and premium build quality. The drive bay arguably ruins the front’s sleek look, too, although that’s for you to decide.įractal’s Meshify C Mini is the smallest case in the company’s well-regarded Meshify range of airflow-centric cases. Unfortunately, it does stop you from mounting three front intakes, although we don’t think you’ll need that much intake with a mesh front. The version of the NR400 available in the US also comes with an optical drive bay, which might come in handy if you like your physical media. Three 3.5” drives are stored in a drive cage underneath the PSU shroud, which can be moved (or removed) if needed. There’s room for four 2.5” and four 3.5” drives, which should be more than enough for even the most ardent storage fiend. One of the NR400’s highlights is its ample drive mounting locations. It’s an all-around solid case focusing on airflow, with enough room to meet most users’ hardware and storage demands. Cooler Master’s NR400 is one of the company’s newest Micro-ATX cases.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |